Large scale Test trebuchet.

In an attempt to learn a bit more, overcome any design faults etc  before I try to build a small scale working version ( and have a bit of fun) I´ve built a large scale working trebuchet.
I´ve learnt a couple of things. The counter weight. It needs to be quite heavy...my first attempt I filled it with stones like they would have, but it threw very slowly, so I re-filled it with lead. I could also have moved the counterweight further away from the fulcrum point, but as there is only a couple of cm´s between underside and the running board, especially when the counterweight swings back and forwards after firing,  this was impossible. The only solution to increase the distance of the counterweight along the arm would be to increase the height of the middle section..which is now too late.
Also..the range can be altered by lengthening or shortening the strings to the sling as does slightly altering the angle of the pin that the loose line is attached to. Bend it a slight bit more away from the direction of throw and it increases the release time..which alters the flight..making it flatter, less of a high arc.
Set up as it is at the moment,  it throws a 4-5 cm´ds wide stone 20-25 meters.
Not far considering it´s size, but this is due to the positioning of the fulcrum and the weight of the counterweight,

No claims to historical accuracy....it´s missing a lot of supports and the actual body length is way to short at the front. I also left any winding gear off..it just seemed (at the moment) impracticle.

The axles for the arm and the counter weight proved difficult. I used metal tubes inserted into the arm, then other slightly longer thinner tubes held in place with washers were pushed through them. The bolts were then inserted. This made sure that no wood was touching moving metal and decreased the friction, which would have slowed the firing action down. 

The trigger. I added this type of trigger, one using a pull cord after the one that was more historcally accurate, a pin that was knocked out, got me a whack on the ear from the arm releasing.

A couple of mini videos showing it in action

Hello to Marzio from Fog´s Soldiers. blog. In his own words " Fog' s Soldiers is a professional miniature painting service and a producer of high quality, handcrafted, scenery and model trains services."

Hello to Punkreaper from G+

Hello to Ralph Ashdown..I´ve seen your name mentioned on sean´s Blog..but no link from here?

Mike Whitaker has Just given a link to a site that works out the statistics of a trebuchet for you....

Virtual Trebuchet    Excellent..just what I was looking for. :-D

Medieval Castle

This quite incredible 1/72nd scale castle was scratchbuilt  some 15yrs ago by Tommy  and  Tina, who run an Online indian Clothes and accesories shop called Om - Lakshmi.
I now have the honour and pleasue of becoming the Guardian of this beautiful piece of construction.
All I have done is  clean it up, repair a couple of small pieces,  a dab of paint here and there, paint up the wooden beams on the timbered house parts, base and landscape it.(add the rocky outcrops)
It measures, 70cm´s long, 55 cm´s wide and to the top of the main tower, 40cm´s high.
The main Keep and the Guardhouse have had some weathering done to the brickwork. I may continue this at some point.

I really like the way it seems to be built in a "as needed" way..like parts have been added as time went by and the population / influence of the castle grew, just like in real life.

The ground work still need a bit of vegetation etc.

The store house which .................

..........has a removable roof!! There are 4 removable roofs in total..and all the buildings can be removed from the base....not just that but they all   can be lit up from inside.

All the tiles were individually cut out and glued on ! I keep trying to imagine how long this all took!!

Not a brilliant photo but the catwalk near the front gate is also completely hand made!!!

View from the storehouse to the guardhouse (the drawbrige works)

The lord and lady surveying thier new Home...are they pleased? You bet they  are!!!!!!

There are a lot of details that are only just visible but almost impossible to photgraph. For instance, the wall running up along the ramp from the guardhouse. It has the catwalk and under the catwalk there is a hollowed out area (where the window is) so crossbowmen can stand without being in the area of the ramp. The beams etc in the roofing...all hand made and   constructed from Matches!

Hello to Speedy from Soldiers of Honour blog  I´ve tried to add my blog to the followers list but it keeps coming up "website not available".  Shows up in the blog roll though (?)

Zvezda Trebuchet

Finally after a very long search I´ve obtained the Zvezda Trebuchet. I found it for sale at Kalfakis Model Hobbies in Athens..and I can only HIGHLY commend the service provided. Even as a first time customer, every one of my questions was answered,  after I put the wrong (Too high) price in I was E-mailed that I was going to pay too much and  the delivery was prompt. A big thankyou to Costas for the excellent service ....:-D 
He has another 5-6 Zvezda trebuchets for sale...so if you´re after one..be quick ;-D

All three together..Faith, Hope and Charity. From left to right, Miniart, Fredericus-rex and Zvezda

Hello to Jen and Ben from Jen & Ben´s Wargaming Figures blog. If only I could paint as well as they can!!!!!!!!!

Palm Trees ( "scratch Built" )

Sir Henry Botherington Smyth is having a relaxing rest under the shade of a couple of palm trees. The well is re-cycled from the Order of the Holy Sepulchre of Jerusalem Dio.....

The palm trees..how to make them. A couple of weeks ago Michel from Germania Figuren visited and we discussed, among other things, Palm Trees. He told me that Erik Trauner makes his using the middles from Pinecones. Off  I went and got one and we both tried (without success) pulling the scales off with pliers etc. A few days ago I was again  thinking how to make palmtrees for the Khandibar set up and bingo!!!

What do you need ? A pair of scissors, some clear silicon, some plastic decoration leaves (the sort with a metal or plastic spine welded under the leaf, the ones used for roses seem to be the best) a Pine cone...AND!!!!!!...................

..........A Squirrel. One of the visitors to our garden...:-D

Squirrels like the seeds in pine cones and to get at them they strip the scales off. and then throw the core down. After just a quick look under a pine tree near our house I collected over 50 such "cores". The only thing the squirrel doesn´t do is remove the "tuft" of scales at the top, but as this can be easily snapped off, I´ll let them off.

The Plastic leaves. Simply cut down to the rough size wanted, and with scissors cut irregular strips all along the sides. When that´s done, turn the leaf over and remove the last 1/2 cm of the spine near the base of the leaf. This gives it a nice flat area for attaching. Bend the leaf to shape(the bending also spreads the fronds apart)....and using silicone, glue to the top of the pinecone core in an overlapping clockwise (anti-clockwise)  pattern.

If anyone is interested, Valdemar are looking for sponsors to help fund a set of Bods.

The concept:
It costs 50 euro to be part investor in the set, these money are used to help cover some of the development costs. What you get are that you help the range grow and you get 1 sample set from the first testshots, so you will get the figures way before anyone else.

How:
You sign of for 1 share (10 total) and when all ten are sold the project will begin. If the project are not completed you will get your money back.
It will be a "brutal" battle set..so if your interested,  contact Jens on the Valdemar site

Orc warriors 2 (Conversions)

A bit of snipping and another 5 orcs are added to the warband.


Bottom half of rider and horse from Zvzda´s Carthaginian Numidian Cavalry I´ll give the rider a wolf when I find a decent sized one.

Orc knight after head swop onto a Zvezda English Knight of the 100 Years War

They even make good Wildmen (Cavemen) after a head swop using Zvezda´s Medieval Peasant Army

The weapon changes..how´s it done? Quite simple really

Tools....cork, pliers, sharp blde (I like to use cutdown Razor blades..easier to handle) a pin and a Darning needle. The 0.8mm florist wire is for making lances/flagpoles etc.

Simply remove any previous weaponary. With the pin, make a hole right through the hand, being carefull to make sure it goes exactly through the middle. I´ve found it´s best to use a pin first for the harder type plastics and even the softer ones (HaT) It opens up the plastic a bit before the proper hole is made. If you see any whitening of the plastic put the bod into   boiled water for a minute. This will destroy the plastics "memory"

After making the first guidance hole ust the darning needle to expand the hole. Slowly push the needle through and at least once  hold in hot water to further destroy the plastics memory. Go all the way to the thickest part of the needle, hold in hot water to again destroy the memory and retain the hole and take the needle out. Fill the hole with a weapon .Told you it was easy :-D

For bods that end up with say a spear hold in both hands and previously  they had only one weapon (the orc archer above) it´s just a matter of looking at the bod, working out if the pose suits  and then giving it a go. Conversions like the orc archer are a bit more difficult..you seem to need 2 pairs of hands to hold, twist and insert the lance through each of the two hands but with practice it works fine.

Orc Warriors (Caeser )

Medieval fantasy? Well....Sort of..:-D
There´s a few more fantasy sets planned and some more available, like the Orion/Dark Alliance orcs, and at some point maybe PSR will have to add a new section to the listings and move the Caeser sets out of the  Features section.

Even using just one pose of each from the set they make a decent sized warband.

The one on the far left..a female?

My favourite poses from the set. I haven´t yet added a symbol on the standard..I can´t decide on anything appropiate yet..and I don´t want the usual red eye or white hand....

I haven´t added bowstrings. Their big ugly heads are in the way.


Hello to Dead Guy from DeadGuy´s Ditch blog. He´s not been blogging for long and has just posted an excellent post called,  The One Wargame Book To Rule Them All about a wargames book called Games of war.
Hello to Don Carlos Suratos from DC23 Hobbies Blog.  The "just short of " 2,000,000 hits shows how popular his site is and no wonder, he´s got some pretty amazing stuff...the tutorials section is really something else!!

Elves as Adventurers

Elves? I´m not too keen on them myself...bit to "high and mighty" for my liking, so these got thier ears trimmed and have joined the human adventurers.


Ok...she lost her long pointy ears but the eyebrows are still a problem

An attempt at getting a nice glittery dress effect..

Alan Assassin aims an arrow accurately at an apple- 

Converted Medievals

One of the great things about 1/72nd plastic bods..they are comparatively cheap and therefore there´s no great loss when experimenting with conversions.


 Easy conversion. Two from the Miniarts French Knights with assault ladders. Normally they are attached to the ladder but after removing the "ladder Clips" and attaching one foot to a base, two carging Knights.

Another easy one. The Archer´s body from Aifix´s Sherriff  of Nottingham set and a head from the Zvezda´s French Infantry of the Hundred Years War. The standard bearer (from Redbox´s Town and county Levy ) lost his Halberd and gained a flag. 

More complicated. A couple  of bods from Zvezda´s English Infantry of the 100 Years War, with a bit of arm twisting / swopping, the hands re-modelled and the seigepark gets a couple of new workers.   

Body transplants. Always a bit dodgy. The top half has to look "natural" on it´s new legs. This isn´t difficult when creating a riding pose but the foot bods are a pain. Both tops halves are from Zvezda´s French Knights.   The trumpeter´s legs are from Zvezda´s French Infantry of the Hundred Years War, the Knave´s from Italeri´s Medieval Tournament and Medieval Challenge.. (one thing..the hand of the trumpeter, the one holding the trumpet..try that at home!!!! ) 

Edward Lear Animals

It was the  birthday anniversary of the artist and writer genius,  Edward Lear or as he would introduce himself, Mr Abebika kratoponoko Prizzikalo Kattefello Ablegorabalus Ableborinto phashyph.  
Born on the 12th of this month, 200 years ago,  there was a lot of discussion on Radio 4 LW about him..and it got me thinking..  :-D

A Hamel..is a camel,

with the head of a horse.

A Corse..is an animal

the other way around...of course!

The very ungainly looking Hamel

The almost feasable looking Corse

Hello to Mr Lee
Hello to  Michigentile from Michigentile´s Microworld blog. Member of the Valdemar Forum (the place for medieval fanatics) A fan of medievals and he creates some excellent dios on the period.

Colonial Beer Wagon

After seeing Michael´s Excellent Water cart I had to have one myself..ok, the medieval ones got in the way but finally I have produced one for the Khandibar colonials. if..and when Hat releases it´s Colonial General service wagons and Oxen carts I will make a small supply train..which will never live up to the genius of this supply column. Some of the photo´s are damm near to looking real, well worth a look...(he said jealously :-D)

Even after a bit of work, the Renedra barrel still has visible misaligned mold lines. Still, they are cheap and Renedra do make some lovel terrain pieces.

Carriage from Zvezda´s Peter the great russian artillery set, horse from Airfix´s German mountain troops..bod from HaT

Hello to Kaptain Kobold :-D

Airfix WWII British infantry

After a long pause I´ve finally got back to my quest of painting every set of bods that Airfix has ever produced using only original figures.
63 sets, of which 3 feature mainly  animals so don´t count (ok, the Zoo animals set 1 has a bod in it) and the SAS set which is listed but was only ever made in 1/32nd. 5 sets are repeated..they have an earlier version and if I ever get through the PSR list I´ll paint them as well. 59 sets of which I´ve got 31 finished !!!! :-)

I won´t make any comment, the review at PSR says it all.

Narnia - The Invasion Begins!!!!!