Roman Legion on the march (Strelets)

What the roman grunt spent a lot of his time doing :-D
Not a bad set..it includes The heavy infantry and auxillaries. PSR review Here

Column made up from two sets from strelets, Hat standard bearer and Zvezda musician and Imaginifier

Legionaries. I know...the tunics are  red..highly unlikely but it looks good

Auxillaries

Legionaries from behind. Note the bod at the rear right corner...those bendy strelets spears!!!!! They should really get to grips on this point...having the spears cast along the shaft onto the sprue makes one hell of a job to cut them free.

Auxillaries from behind . Cavalry coming soon :-D

Hello to Waz...thanks for following
Hello to Andy from Creepy Corridoor blog. great 40K wargaming and his last post questioning wether wargaming is going digital is well worth a read.
PS..Andy..your google friends connect isn´t on :-D

Medieval baggage

First part of a medieval baggage train. Donkeys and carts later.

Haycart. The cart and oxen are from the Pegasus "California mission indians"  A good little set..lots of very usefull monk bods. The bod from Zvezda´s Medieval peasant army.

Zvezda gun "carriage" and orion bods from the Medieval siege troops set.

The zvezda gun "carriage" with the team guide from the set.

With gun added

The baggage so far.

Robin and son

Two more Valdemar bods. Who they are saying hello / goodbye to...but whoever it is...son of Robin has seen something much more interesting. 

Medieval Hut ( How to )

Quick and easy...and cheap as mud :-)

Medieval hut or stoneage or fantasy or whatever

The Materials.....Green insulating foam, sharp blade, scissors, stapler, pins, woodglue and some paint and some thin card (the sort from a cereal packet is good. You also need a handbrush or a softbroom (not shown in picture)

Cut a strip of insulating foam across the lines. if the strip is cut along the lines it doesn´t bend easily..in fact it snaps. Using a biro score the brickwork pattern. Do not cut out the door at this point. Glue the whole thing to a base and hold in place with some pins. The join at the back will need pinning as well.

Here I have smeared some sand mixed with woodglue on the basing. Leave the whole thing to dry.

The roof. Mark a circle on some card, cut out and cut a line to the center. lap one side over the other to form a flat cone and fix in place with a staple.

Put the cone over the house and cut back (remove the bottom) as necessary so you end up with about 1cm of overhang all the way around. At this point you can cut the door out. If you do this earlier, it creates a weak point in the wall which almost immediately will break when you start to bend the wall into shape.

Then I paint everything in dark brown. if a door is going to be added you don´t have to paint the floor inside. If the doorway is left open and you don´t paint the floor it looks a bit odd, as if  the owners are burning logs that produce a fluorescent green glow. Either that or witches have set up house.

Shade, highlight or whatever. It´s a good idea to paint the roof as in the pic. If left just dark brown it can show up through the thatch ...Oh yeh...glue the roof on!! :-D

Cut bundles of bristles off the handbrush / broom. These should be about 3-4 cms long. Smear some wood glue on the roof and then dip one end of the bristle bundle into the glue.

Attach  the bundle to the roof, spreeading it  flat. Keep going around until one layer is complete, then add another overlapping layer and so on.

Let the whole thing dry..trim the thatch to tidy it up a bit..add flock or whatever....finished.

Wargaming bases

I have based all my bods on single bases made using discs cut out of Ikea place matts. This was mainly because I wanted to be able to mix and match them  as I wanted and I didn´t intend to have so many for wargaming, just a few for skirmish type fights.
The numbers have grown though and as I´ve recently started making a Burgundian army for Impetus rules I thought I should base all the others for the same rules..but this would have meant rebasing a couple of hundred bods and nags so I came up with this;

The materials, sand, thin wooden sheet,  underfloor insulation sheeting and wood glue

Cut holes in the insulationfoam, glue to the woodenbase, this one will be for a cavalry base.

Smear woodglue over the top surface of the foam, turn upsidedown and push into the sand.

After drying, paint and decorate

Airfix Sherrif of Nottinghams cavalry

Infantry bases with Zvezda, Italeri, Revell and  Airfix bods

To create a defensive position , square or whatever, the position of the bods can be altered :-D

Medieval Village (macro shots)

But first,  the church on it´s new perch. This I´ve made so I can re-use it..maybe put a manor house, small fort etc on it..

Especially for Paul from the Man cave Blog.....how the lighting is done :-D

This is one of those kitchen lights for under cupboards etc, you push the middle and the LED lights come on, a pack of 3 for 4.99€  :-D

Now the Macro shots

Hello to Bob1302 and David Marshall...thanks for following :-D

Medieval Church and graveyard (1/72nd)

"More tea vicar?" I got the church and graveyard finished yesterday..:-D

Graveyard with charnelhouse /chapel

A little corner of the graveyard

The windows I got from the web..from a site called Freewareme, re-sized and printed them out....a hole underneath and a small bulb...and it´s evening mass! :-D

Medieval Village (1/72nd)

Same construction method as the Roman Town, the only real change is with the thatched roofs. These are done by glueing clumps of Handbrush bristles onto  cardboard.
This time I´ve given a bit more thought to the basing. I´ve made the bases so that each section can be rearranged to give a different layout when needed.
The "decoration isn´t finished, bushes , trees, a bit more grass and a few animals will be added.

Random arrangment. The two round huts (pig keeper on the right) are re-used from this dio...NO TAXES!!

View from "pig keepers" across the square, of  the pub

Set up in a  "the injuns are coming!!"  pattern

Some street pieces, a  church and graveyard with charnel house are in construction

Hello to Wilson Edward Toy Soldiers. On his blog,Wilson Eward Toy Soldiers, he shows a grand collection of 54mm Bods and his other Blog, Land of the Lead, deals with all aspects of bod collecting...with some very clever photos..
Hello to Anubis 88...now this is where it gets a bit confusing because yesterday I saw that Yarik from Yarik Miniatures blog, announced that his friend had set up a blog...called Anubis Miniatures. but he has an Avatar, and Anubis 88, hasn´t. So either you are both one and the same or......different,  which would be a big coincidence :-D Anyway...thanks to Anubis 88 for following and look at Anub

Publish Post

is´s excellent painting on his blog...Anubis Miniatures.
I´d like also to give a shout for Irqan´s blog, Plastic Zombie. He´s been about on the net for a while but has just set up his blog and will be using plastic bods for Zombie gaming...looks fun already :-D